hpl cubicle partition decoration skills
1. Wall partition. Partial walls and ground-level partitions protect the privacy of the bathroom to a certain extent. The appearance is very harmonious.
2, lighting design. Adequate daylighting is very important to expand the sense of space in the small bathroom. Setting skylights to fully ensure the daylighting of the bathroom.
3. Background wall design. The walls and floors decorated with square tiles are full of three-dimensional concavity and convexity, which can prevent slippage and beautify the space more than smooth walls and floors.
4. Mirror storage cabinet. The storage of the mirror surface can be used as a mirror and can provide storage for the bathroom with one bird.
The installation steps of sanitary partition
1, install the fixing plate
What are the installation steps and construction precautions of the sanitary partition? Find a suitable position on the wall and draw the center line of the fixing piece, punch a few holes on the center line of the wall, and fix the fixing plate on the wall with expansion wire
2, install and adjust the base
According to the pre-designed construction drawings, find the position of the base on the floor of the bathroom and draw the center line, and then fix the base;
3, install the partition board
Put the compartment board on the adjustment base, then adjust the height of the base so that the compartment board is close to the fixing board on the wall, and after everything is adjusted, fix the compartment board on the fixing board and the adjustment base with screws;
4, install the rod
Cut and fix according to the actual length of the compartment. A circular joint sleeve and a tight connection spring sheet must be installed in the tube to ensure that the joint is flat and firm. The joint should be in the upper tension fixing sheet to increase the appearance;
5, install the column
Fix the upper edge tie rod fixing piece and the L-shaped edge connection piece on the terminal column, and then fix the board to the compartment board with screws;
6. Install the door leaf
Fix the hinge seat or the page nose on the column, estimate two or three, and then install the corresponding number of hinge pieces on the corresponding position on the door leaf, put the automatic return nylon seat in the hinge seat, adjust the position, and move after the installation is completed Check.
