Hotel banquet hall movable partition installation design plan
Nowadays, there is a kind of hotel banquet hall movable partition wall that is both gorgeous and removable, which doubles the decoration effect of the hotel. Let's take a look at the installation skills of the hotel movable partition wall. After using this kind of movable partition wall, there is enough space to divide and use. Its sound insulation effect is better than that of traditional fixed walls. The decoration waste during disassembly is less than traditional ones. It is easy to clean and does not affect business. The partition system plays an important role in the overall hotel decoration.
1. Carefully observe the construction environment of the overall partition, and design a reasonable plan for the mobile partition wall of the hotel.
2. According to the construction drawing requirements of measurement and positioning, divide the indoor ground partition position.
3. There are two ways to install the track: suspension type and support type.
4. When installing the movable panel, according to the design drawing, draw a pulley line on each partition panel, test and push and pull to rotate flexibly, and then connect and fix each fan.
5. The veneer is usually decorated according to the interior design and decoration style of the hotel, usually using soft packs, veneer panels, inlaid glass, etc. After finishing the finish, paint finishing or edge finishing can be carried out.
6. Adjust the test and accept the decoration results, and clean up the site after commissioning.
1. Carefully observe the construction environment of the overall partition, and design a reasonable plan for the mobile partition wall of the hotel.
2. According to the construction drawing requirements of measurement and positioning, divide the indoor ground partition position.
3. There are two ways to install the track: suspension type and support type.
4. When installing the movable panel, according to the design drawing, draw a pulley line on each partition panel, test and push and pull to rotate flexibly, and then connect and fix each fan.
5. The veneer is usually decorated according to the interior design and decoration style of the hotel, usually using soft packs, veneer panels, inlaid glass, etc. After finishing the finish, paint finishing or edge finishing can be carried out.
6. Adjust the test and accept the decoration results, and clean up the site after commissioning.
.jpg)
Comment